Choose the finish the ground needs
Adjust the cutting height from 3 to 20 cm. Leave a taller stubble or bring growth down closer to the ground to suit the task and the conditions.
Preorders openRM80A clear path through demanding groundXAG RM80 Robotic Mower
Meet the RM80. Electric mowing with a front-mounted flail deck, independent four-wheel drive and repeatable routes for orchards, field margins and overgrown land.
- Cutting width
- 80 cm
- Adjustable cut height
- 3–20 cm
- Ground clearance
- 270 mm
- Independent four-wheel drive
- 4WD
Electric at every wheel. Purpose-built at the front.
The RM80 pairs a lightweight aluminum chassis with a direct-drive cutting deck. Work across uneven ground, adjust the cut from your controller, and repeat a recorded route when the same area needs mowing again.
80 cm of focused cutting power
The front-mounted deck reaches vegetation before the wheels pass over it. Its standard 80 cm width is designed around orchard row spacing, with an electric actuator to set the cutting height remotely.
80 cmCutting width
Flail blades that cut and shred
A horizontal shaft carries vertically rotating, Y-shaped high-manganese steel blades. The flail action cuts and shreds tall grass, reeds and small shrubs.
Direct electric drive at the deck
Continuous motor output keeps the cutting deck working through dense vegetation. Inspect the ground and select a travel speed that suits the material and terrain.
Made for the ground between the rows
Four independently driven wheels deliver up to 96 N·m of torque each. Turning in place helps the RM80 change direction in confined spaces, while a suspended portal axle supports traction over uneven ground.
- Maximum climbing grade
- 30% / 16.7°
- Maximum torque per wheel
- 96 N·m
- Net machine weight
- 143 kg
Strength without unnecessary weight
A die-cast aluminum-alloy frame balances strength and a 143 kg net machine weight. Plan loading and transport equipment around the complete operating configuration.
More room beneath the chassis
270 mm of ground clearance helps reduce underbody contact. The suspended axle design helps the wheels follow changing ground levels.
Each wheel has its own drive
Independent electric motors distribute drive across all four wheels and enable turns in place. Maximum stated travel speed is 1.5 m/s.
Rinse off the working day
The RM80 has an IPX6 protection rating and supports full-machine washdown, making it easier to remove mud and grass after mowing. Follow the manufacturer’s cleaning instructions.
IPX6Different ground. The same working platform.
Orchard rows
Maintain grass between established rows, with front-deck cutting and repeatable routes for recurring work.
Field stubble
Manage vegetation and crop residues with an adjustable cutting height and a flail rotor that shreds as it cuts.
Overgrown land
Work through tall grass and reeds when bringing neglected areas back into a maintenance routine.
Plan the job around real conditions
XAG’s presentation lists 0.13–0.27 ha/h for open fields and 0.33–0.53 ha/h for orchard rows. Vegetation density, cutting height, terrain, turns and battery changes affect actual output.
- Open-field work
- 0.13–0.27 ha/h
- Orchard-row work
- 0.33–0.53 ha/h
A battery rotation built around your work
The B141050S Smart SuperCharge battery provides 1,050 Wh of energy. XAG states up to 20 minutes of mowing with one battery and up to 40 minutes with two. Match battery quantity and charging capacity to your workload.
- Up to, with one battery
- 20 min
- Up to, with two batteries
- 40 min
- Capacity per battery
- 1,050 Wh
CM13600S charging
The 3.4 kW charger has a fastest stated charge time of 12 minutes from 30% to 95%. SkyFlow will confirm the charging equipment and power supply for your package.
12 min30% to 95%, fastest stated chargeManufacturer figures are reference limits. Runtime, charging time and battery life vary with load, temperature, power supply and battery condition. Batteries, charger and controller inclusion must be confirmed with your package.
Your route, with intelligent control
SuperX 5 Ultra connects the mower’s movement, cutting controls and route tools. Start with live FPV control, set a consistent cruising speed, or prepare a repeatable route for recurring work.
See the work from the mower
Use the live FPV view to monitor the mowing area and control travel, steering and operation remotely.
Illustrative route views
Record once. Reuse the route.
Record a route and recall it for recurring mowing in the same area. Check the route and its surroundings before every run.
Illustrative route views
Plan the next pass on the map
Mark waypoints and plan the mowing route on a map before sending the mower into the work area.
Illustrative route views
Return when the job is done
Automatic return brings the mower back to its starting point when the task is complete or the battery runs low.
Illustrative route views
Keep a consistent pace
Set cruise speed between 0.1 and 1.5 m/s to support a more uniform cut with fewer continuous speed adjustments.
Route tools assist the operator. Validate routes, keep the work area clear and maintain active supervision. Confirm supported control functions and interface availability with SkyFlow.
SRC6. A clear view of the work.
The SRC6 Smart Remote Controller combines a 7-inch high-brightness screen with live vehicle status and FPV video. XAG lists up to 8 hours of controller battery life and a 500 m XLink signal range.
- High-brightness display
- 7 in
- Controller battery life, up to
- 8 h
- Stated XLink range
- 500 m
- Horizontal FPV field of view
- 150°
Radio range depends on the environment, obstructions and interference. Controller battery life is separate from mower operating time.
A closer look at the RM80 in the field
See the electric platform and cutting system in operation. Discuss your vegetation, row spacing and ground conditions with SkyFlow before choosing a package.
The RM80, in detail
Chassis & mobility
- Frame construction
- Die-cast aluminum alloy
- Net machine weight
- 143 kg / 315 lb
- Ground clearance
- 270 mm / 10.6 in
- Independent four-wheel drive
- 4WD
- Maximum torque per wheel
- 96 N·m
- Maximum travel speed
- 1.5 m/s / 3.4 mph
- Maximum climbing grade
- 30% / 16.7°
- Protection rating
- IPX6
Cutting system
- Cutting width
- 80 cm / 31.5 in
- Adjustable cut height
- 3–20 cm / 1.2–7.9 in
- Blade system
- Horizontal flail rotor with Y-shaped steel blades
- Open-field work
- 0.13–0.27 ha/h
- Orchard-row work
- 0.33–0.53 ha/h
Battery & charging
- Battery model
- B141050S
- Capacity per battery
- 1,050 Wh
- Up to, with one battery
- 20 min
- Up to, with two batteries
- 40 min
- Stated battery cycle life
- Up to 1,500 cycles
- Charger model
- CM13600S
- Charger output
- 3.4 kW
- 30% to 95%, fastest stated charge
- 12 min
- XAG P150 Max compatibility
- Charging equipment can be shared with the P150 Max
Control & remote
- Intelligent control
- SuperX 5 Ultra
- Remote controller
- SRC6
- High-brightness display
- 7 in
- Controller battery life, up to
- 8 h
- Stated XLink range
- 500 m / 1,640 ft
- Horizontal FPV field of view
- 150°
- Cruise speed range
- 0.1–1.5 m/s
- Route functions
- Route recording, repeat, waypoint planning, automatic return
Specifications come from the supplied XAG RM80 launch presentation. Figures are manufacturer reference values and may vary with configuration. Canadian package contents, availability and delivery are confirmed before an order is accepted.
Before you pre-order
What is the RM80 designed to mow?
The RM80 is designed for orchard rows, field stubble and overgrown land. Its front flail deck cuts and shreds tall grass, reeds and small shrubs. SkyFlow can review your vegetation and terrain before recommending a package.
Can I pre-order online?
Yes. Pay a refundable CAD $59 deposit online to secure a prioritized RM80 order. SkyFlow then confirms Canadian pricing, the package, availability and delivery timing with you before you place your final order.
Are batteries, the charger and SRC6 included?
Package contents are not yet confirmed. The deck describes the B141050S battery, CM13600S charger and SRC6 controller as part of the RM80 system. SkyFlow will itemize what is included in your quote.
How long will it mow?
XAG states up to 20 minutes with one battery and up to 40 minutes with two. Dense vegetation, slopes, cutting height, travel speed and battery condition change the actual runtime.
Does a 30% grade mean a 30-degree slope?
No. A 30% grade is approximately 16.7 degrees. This is the maximum stated travel grade, not a guarantee that every slope or mowing condition is suitable.
Put the RM80 to work on your ground
Tell us what you mow, how much ground you maintain and what the terrain is like. We will help scope the machine, power system and pre-order details.