
High-flow spraying
RevoSpray 4 combines a 70 L tank, rotary atomization, and up to 30 L/min maximum flow.


XAG Authorized Distributor in Canada, serving customers from coast to coast.
The multi-task
workhorse.
A 70 kg agricultural aircraft built around three jobs that matter: precise liquid application, high-rate granular spreading, and field mapping from the same platform.
The P150’s pitch is not that one module does everything. It is that the same flight platform can move between dedicated spray, spread, and mapping systems—while keeping aircraft, controls, positioning, and power workflow familiar to the crew.
Configure the 70 L smart liquid tank, dual pumps, and rotary atomization system for open-field and orchard crop protection.
Task-system configuration, application rate, route, and operation remain subject to the product instructions, field conditions, and applicable Canadian requirements.


RevoSpray 4 combines a 70 L tank, rotary atomization, and up to 30 L/min maximum flow.

A multi-task airframe sized for liquid, granular, and mapping configurations.

RevoCast 4 supports fertilizer, seed, feed, and dry-powder workflows.

SuperX 5 Pro combines 4D imaging radar with real-time 3D terrain mapping.

Detachable task systems, foldable arms, and IPX6K protection support field turnover.

XAG One can use compatible maps for zone-based variable-rate application.
RevoSpray 4 combines strong quad-rotor downdraft with rotary atomization. The system supports open-field and orchard workflows, but coverage still depends on the label, canopy, weather, route, width, speed, flow, and droplet setting selected for the job.


The dual-pump system reaches a maximum flow of 30 L/min and more than 300 hours of pump service life.

A pressure-based liquid-level system is designed to reduce foam interference when reading remaining volume.

Adjustable 60–500 μm droplets support different target, canopy, volume, and weather requirements.

Nested caps simplify refilling between application cycles.
Application capacity
495 L/ha
At 2.5 m/s travel and 4 m spray width.
Application capacity
102 L/ha
At 7 m/s travel and 7 m spray width.
RevoCast 4 pairs a 115 L container with interchangeable screw feeders and a vertical waving spreader. Output changes with material density, granule size, surface, moisture, wind, route, and calibration change real output.


Adds downward force to granules to support wide placement and wind resistance.

Match the delivery system to fertilizer, direct seeding, aquaculture feed, or powder.

Large filling ports on both sides reduce handling time at the refill point.
RealTerra 3 captures high-definition imagery during an autonomous survey, stitches the result after landing, and supports later route planning across up to 32.9 ac (13.3 ha) in one flight.


Build and launch the survey route from the field workflow.

Generate the map after landing without depending on a network connection.

Use a realistic terrain model when planning work over complex ground.
SuperX 5 Pro combines 4D imaging radar, real-time 3D terrain mapping, and downward visual assistance. These systems support flight planning and intervention—they do not make every obstacle, surface, or environment detectable.

4.9–328 ft
(1.5–100 m)
Radar sensing range
Real-time 3D
Terrain mapping without a preloaded map
Assisted landing
Downward vision records and checks the landing area
The useful design story is practical: task systems detach, arms fold, the aircraft carries an IPX6K rating, and the structure is organized for transport, assembly, cleaning, and maintenance between jobs.


Designed for deformation and heat resistance with lower operating noise.

Switch the aircraft between spraying, spreading, and mapping configurations.

Folding the arms reduces aircraft volume by 20% for storage and transport.

The protected airframe is designed for direct wash-down after operation.
XAG One brings route planning, multi-field queues, collaboration, variable-rate application, and access-route controls into one workflow. Availability and permitted use depend on the current software, aircraft setup, and Canadian operating framework.
XAG One generates a route from field shape and mission parameters. Low-liquid and low-power workflows can return the aircraft home, with pause and resume available to the operator.


A lightweight one-hand control with Bluetooth quick link, safety lock, one-button operation, and up to 12 hours of endurance.

A 6-inch 2K display, manual and autonomous modes, downward-FPV waypoint marking, and an open-field range up to 1.2 mi (2 km).
XRTK6 Pro can provide local positioning without a CORS network, while DL1 extends Wi-Fi communication. Range claims are open-field references and must be tested against terrain, obstructions, interference, and the actual crew location.


Up to 2 km Wi-Fi repeating, smartphone connection, and support for two-aircraft workflows.

Portable RTK base, field marking, PPP support, and Wi-Fi repeating up to 1.5 km.
The P150 power system combines the 975 Wh B13970S battery with cooling, fuel-powered, AC, and parallel charging options for fast field turnaround.


975 Wh · 1500 cycles

6–8 hours per water fill

Fuel-powered field charging

3.4 kW · 30–95% in ~11 min

6.8 kW · 30–90% in ~6 min
The P150 Max moves the platform to an 80 kg payload, 80 L liquid tank, 32 L/min dual-pump spray flow, 20 m/s maximum speed, and adds RevoSling material transport.
SkyFlow will review the crop, target, application volume, material, terrain, mapping, power, transport, crew model, compliance path, and current Canadian availability.
Verified aircraft, application, control, connectivity, mapping, and power-system specifications for the XAG P150.
The P150 is the 70 kg generation with RevoSpray 4, RevoCast 4, a 70 L liquid tank, 30 L/min maximum spray flow, and 18 m/s maximum flight speed. The P150 Max increases task payload to 80 kg, liquid tank to 80 L, dual-pump flow to 32 L/min, speed to 20 m/s, and adds the RevoSling lifting workflow.
This is an inquiry-led product page, not a live inventory statement. SkyFlow will confirm the current Canadian configuration, supported accessories, compliance path, training, and delivery status for the intended operation.
XAG positions RevoSpray 4 for both open-field and orchard crop protection. Suitability still depends on the approved product label, target, canopy, terrain, weather, droplet setting, rate, route, and applicable Canadian requirements.
No. The radar sensing range is 1.5–100 m. Detection and terrain mapping assist the operator but do not replace route planning or active flight supervision.
XAG One supports a two-aircraft swarm workflow. Use in a Canadian operation depends on the aircraft configuration, operating certificate, local requirements, site controls, crew plan, and supported software.
Yes. The comparison should cover required payload, liquid volume, flow, material, speed, mapping, lifting needs, power logistics, transport, support, compliance, and lifecycle cost rather than selecting from one headline specification.
Share the crop, acreage, target rate, refill plan, granular material, terrain, mapping needs, crew model, and power source. SkyFlow will evaluate the complete operating system around the work.