Power 1000 V2 pairs a 1024Wh LFP pack with 2600W of continuous AC output. It runs equipment that is well beyond the Power 1000 Mini's regular output range without moving to the larger 2048Wh station.
A North American wall outlet charges the station from zero to 80% in approximately 37 minutes and to full in approximately 56 minutes. Standard recharge mode stays at or below 26 dB under the rated test conditions.
Two 140W USB-C ports, AC, USB-A, SDC, and SDC Lite connections cover a mixed field kit. Add up to five Expansion Battery 2000 units when the job grows beyond one kilowatt-hour.
DJI Power 1000 V2 · Expandable high-output field power
Production lights, tools, mobile workshops, drone fleets, home backup, and expandable vehicle systems
Output
2600W continuous
Capacity
1024Wh
Carry
14.14 kg
Recharge
0–80% in 37 min · full in 56 min
Expansion
Up to 11,264Wh
What changes the working day.
Run the equipment the Mini cannot.
The 2600W continuous inverter supports production lights, power tools, cooking equipment, chargers, and most ordinary household appliances.
2600W continuous output
Twin 140W USB-C ports
0.01-second UPS
Full in about 56 minutes.
A fast AC turnaround lets one station cover repeated call times, split shifts, workshop cycles, or short grid windows.
0–80% in approx. 37 minutes
Full in approx. 56 minutes
Standard mode at or below 26 dB
Fast-charge supported flight batteries through SDC.
Use the correct model-specific cable to create a direct field-charging path with less conversion hardware than a conventional AC charger.
Model-specific cable required
Selected Mavic, Air, Matrice, and Inspire support
Charge aircraft while other ports remain in use
Start at 1024Wh. Build to 11,264Wh.
Connect as many as five 2048Wh expansion batteries for longer outages, remote work, or a fixed vehicle-power installation.
Up to five expansion batteries
11,264Wh total capacity
Mounting and hand-truck options
Choose the charging path before choosing the cable.
Wall, vehicle, solar, aircraft, and expansion connections do different jobs. Build the input plan around where the station spends the day.
Wall
Reach 80% in about 37 minutes and full in about 56 minutes.
USB-C
Two 140W ports supply as much as 280W together.
Vehicle
Use the optional 1kW car charger or lower-rate vehicle cables for a supported fuel vehicle.
Solar
Use MPPT or the 1.8kW solar/car charger with supported panels and wiring.
Expansion
Connect as many as five Expansion Battery 2000 units for 11,264Wh total.
High-rate car-charging accessories are designed around supported fuel vehicles. Hybrid and fully electric vehicle charging systems require a different plan.
Five jobs this station handles well.
Location production
Run larger LED fixtures, monitors, laptops, camera charging, and communications from one station.
Mobile workshop
Supply saws, drills, compressors, soldering tools, chargers, and task lighting away from grid power.
Drone fleet charging
Use SDC for supported flight batteries while AC and USB ports cover controllers, screens, and computers.
Home office backup
Place network, computer, and selected desk equipment on the 0.01-second UPS path.
Expandable vehicle system
Add car charging, solar input, expansion batteries, mounting, and planned cable routing.
List running watts, startup demand, duty cycle, and the hours each device must operate.
02 · Choose every input
Confirm wall, vehicle, solar, and field-charging routes with compatible cables and practical recharge times.
03 · Lay out the system
Plan ventilation, weather protection, cable strain relief, mounting, lift paths, and vehicle restraint.
04 · Test the workflow
Update firmware, connect DJI Home, label cables, run the real equipment, and record the known runtime.
The questions that change the system.
Why choose V2 instead of Power 1000 Mini?
Choose V2 for 2600W output, dual 140W USB-C ports, much faster wall charging, and expansion-battery support. Choose Mini for lower weight and built-in car/solar hardware.
How many expansion batteries can it use?
Up to five DJI Power Expansion Battery 2000 units, creating 11,264Wh total capacity with the station.
Is the 56-minute charge time for Canada?
Yes. The current Power 1000 V2 product specification lists approximately 56 minutes to full and 37 minutes to 80% under its rated test conditions.
Can it operate as a UPS?
Yes, for compatible equipment. When AC input is present and AC output is enabled, it can switch to battery power in approximately 0.01 seconds during an outage.
Does the box include a drone cable or car charger?
No. The standard station includes Power 1000 V2 and the AC power cable. Model-specific drone leads, car chargers, solar hardware, and expansion batteries are separate.
Buy the station with the cables, charging plan, and load test it needs.
